Cheapish used turntables - need to find a use for an old RB300

Looks like a linn. You could make one out of 12mm mdf or buy one off eBay

By the time I’ve measured, drilled, arsed it up and thrown it at the wall, I’d be better off with the off the shelf route, methinks.

It’s easy enough to get some 12mm mdf or ply. Trace round the supplied board. cut it out & drill the two mounting holes. Then it needs to be mounted on the deck & have the arm mounting point marked at 222mm from the spindle. Take it off & put a 23mm (?) hole at that point.

You could use the Linn cut board but the Rega hole only has to be 11mm further away so is likely to cut across the existing holes.

I was right with you as far as ‘It’s easy enough’…

Seriously, I’d end up with a spoon holder or something.

1 Like

One of our esteemed cnc experts could probably knock one out easily enough.

No doubt - but could they make me an armboard?

The old ones are the best ones…

4 Likes

My brothers first outing in the woodwork class is fondly remembered.

A wooden floating ashtray with cord attachment for our Dad, to use whilst fly-fishing the Tyne. :rofl:

6 Likes

Kwality!

Less an ashtray and more a floating fag holder?
Being pedantic.
:smirk:

1 Like

Yep, both. I’m rumbled. Did you find one useful? :thought_balloon: :wink: